Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
8. Reinstall the lower fascia aligning tabs in lower fascia with upper fascia.
9. Install cable ties - Using (2) cable ties provided, secure lower fascia to hitch
Reinstall the (2) Philips screws at outer ends of fascia, (1) per side.
cross tube by inserting cable tie through the two outer fascia push-pin rivet
attachment points and around hitch cross tube.
10. Reinstall underbody panels using (4) push pin rivets and (2) plastic hex nuts
11. Raise muffler back into position and reattach all rubber hangers removed
removed in step 1, both sides.
in step 2.
©2017 Horizon Global™ Corp - Printed in Mexico
Sheet 7 of 21
24970NP
12-4-17
Rev. A
Publicidad
Tabla de contenido
