Horizon Global 76333 Instrucciones De Instalación página 4

1. Remove taillights - Open tailgate. Remove plastic cover near taillight, using a phillips head screwdriver, remove (2) push-pin rivets holding cover to taillight housing,
both sides. Using a 10mm socket, remove (2) screws from taillight and remove taillight by gently pulling rearward. Disconnect the wiring and set taillight aside, both
sides.
2a. Remove fascia - Using a flat head screw driver, remove (3) plastic push-pin rivets from along bottom center edge of fascia.
©2020 Horizon Global™ Corp - Printed in Mexico Sheet 4 of 24 76333NP 03-02-20 Rev. A