6. Cleaning and maintenance
6.1 Safety advice
o Before beginning with repair or cleaning works make sure the device has been
disconnected from power supply and has cooled down.
o Do not use any acid agents and make sure no water ingresses the device.
o To protect yourself from electric shock, never immerse the device, its cables and
the plug in water or other liquids.
CAUTION!
The device is not suited for direct washing via water jets.
Therefore, you must not use any kind of pressure water jet for cleaning the device!
6.2 Cleaning
o To ensure the device's proper functioning, hygiene and power, clean it at the end of
every work day.
o Before cleaning, disconnect the device power supply, close the water valve and
leave it to cool.
o Remove the rails from the device and wash them thoroughly with warm water and
a mild cleaning agent; rinse in clean water and dry.
o For washing the cooking compartment, use lukewarm water and appropriate cleaning
agents. Rinse the compartment thoroughly with clean water and ensure no residue
remains. Dry the cooking compartment.
o Use only special stainless steel cleaning agents as inappropriate chemicals may
cause corrosion.
o Do not use cleaners containing chlorine (whiteners, hydrochloric acid, etc.).
o After cleaning use a soft, dry cloth to dry and polish the surface.
45