allen+roth LWSCT Instrucciones De Montaje página 5

ASSEMBLY INSTRUCTIONS
7. Securely screw cam bolts (BB) into the designated threaded inserts
on the top panel (A), back panel (B), front panels (J and K) and side
panels (M and N). Fully tighten with a phillips screwdriver. DO NOT
over tighten the cam bolts.
Hardware Used
BB Cam Bolt
8. Securely screw cam bolts (BB) into the designated threaded inserts
on the legs (R, S, T and U). Fully tighten with a phillips screwdriver.
DO NOT over tighten the cam bolts.
Hardware Used
BB Cam Bolt
9. Attach the left side panel (M) between the left side legs (R and S) by
engaging four cam locks (AA) and two wood dowels (CC).
Hardware Used
AA Cam Lock
CC
Wood Dowel
LL Glue
7
A
x 25
K
J
M
N
8
S
x 18
R
U
9
AA
AA
x 4
M
x 2
CC
S
x 1
8
ASSEMBLY INSTRUCTIONS
10. Attach the right side panel (N) between the right legs (T and U) by
engaging four cam locks (AA) and two wood dowels (CC).
Hardware Used
AA
Cam Lock
BB
CC
Wood Dowel
Glue
LL
B
11. Attach the partition panels (H and I) to the back panel (B) by
engaging four cam locks (AA) and two wood dowels (CC).
Hardware Used
BB
AA
Cam Lock
CC
Wood Dowel
T
Glue
LL
12. Attach the front panels (J and K) to the partition panels (H
and I) with four cam locks (AA) and two wood dowels (CC).
R Hardware Used
CC
AA Cam Lock
CC
Wood Dowel
Glue
LL
10
AA
AA
x 4
N
x 2
CC
T
x 1
11
B
x 4
x 2
CC
I
AA
x 1
12
K
CC
J
x 4
H
CC
x 2
AA
x 1
9
U
CC
CC
AA
H
Slides face inward
AA
I
B