ASSEMBLY INSTRUCTIONS
13. Fasten the center front stretcher (P) to the partition panels (H
and I) and the front panels (J and K) with two wood dowels
(CC) and eight 38 mm screws (GG).
Hardware Used
CC
Wood Dowel
GG
M4 x 38 mm Screw
LL
Glue
14. Fasten the center back stretcher (O) to the partition panels (H
and I) with four 38 mm screws (GG).
Hardware Used
GG
M4 x 38 mm Screw
15. Align and attach the previous assembly to the right leg
assembly (T, U and N) with six cam locks (AA) and four
wood dowels (CC).
Hardware Used
AA
Cam Lock
CC
Wood Dowel
Glue
LL
13
GG
P
x 2
CC
x 8
CC
H
x 1
J
14
x 4
I
O
H
B
Cam lock holes face the back panel
15
P
x 6
B
O
x 4
x 1
10
ASSEMBLY INSTRUCTIONS
16. Attach the bottom shelf (Q) to the right side legs (T and U)
with two wood dowels (CC).
Hardware Used
CC
Wood Dowel
K
I
Glue
LL
B
17. Align and attach left leg assembly (S, R and M) to the
previous assembly with six cam locks (AA) and six wood
dowels (CC).
Hardware Used
GG
AA
Cam Lock
CC
Wood Dowel
Glue
LL
18. Using the pilot holes as a guide, fasten the bottom shelf (Q) to
U
the legs (R, S, T and U) by attaching two metal brackets (II) at
each joint, using two 15 mm screws (FF) per metal bracket.
CC
Hardware Used
T
FF
M3.5 x 15 mm Screw
CC
II
Metal Bracket
AA
16
x 2
x 1
Q
The pilot holes will face the floor
when the unit is turned upright
17
M
x 6
R
x 6
CC
x 1
AA
18
x 16
Q
x 8
FF
II
R
11
U
T
CC
P
Q
O