Scope Of Delivery And Accessories; Scope Of Delivery; Cartridge Strips; Shooting Nails - DeWalt PA3500 Manual De Instrucciones

2 Scope of delivery and
accessories

2.1 Scope of delivery

Check the scope of delivery after receipt of
the Powder Actuated Tool. Report missing or
damaged parts to your specialist dealer.
Scope of delivery:
– Powder Actuated Tool
– Instruction manual
– Round brushes, 3 pieces, small, medium,
large
– Nylon brush
– 5 mm hex key
– Splinter guard
– Clamps, 2 pieces (spare parts)
– Steel balls, 2 pieces (spare parts)

2.2 Cartridge strips

Cartridge strips with 10 cartridges each, .27
cal. (6.8/11), colour-coded according to charge/
¿ ring strength. Only the charge/¿ ring strengths
3 (green), 4 (yellow) and 6 (red) of the device
manufacturer are permitted for use with the
PA3500 Powder Actuated Tool.
Art.No. Charge/Firing Strength
DDF1350000
DDF1350050
DDF1350100
green (3)
yellow (4)
red (6)

2.3 Shooting nails

Only head nails with ballistically suitable tips
produced by the device manufacturer are
approved for use with the PA3500 Powder
Actuated Tool.
Maximum length: 63 mm (without pre-drilling),
76 mm (with pre-drilling).
Art.No.
mm
DDF3010000 16
DDF3000050 19
DDF3000100 25
DDF3000150 27
DDF3000200 32
DDF3000250 38
DDF3000300 44
DDF3000350 51
DDF3000400 57
DDF3000450 64
DDF3000500 70
DDF3000550 76
For additional accessories, please see the
catalogue. Subject to change.
3

Before using the device

Observe the safety instructions, see chapter 1.5
"Device and operational safety".
3.1 Minimum distances while
shooting nails
Shooting
Masonry
nails
Distance to
5 cm
the edges
10x
Distance
Diameter
between
of the nail
each other
shaft
English
mm mm pcs. pcs.
7.6 3.7 100 5000
7.6 3.7 100 5000
7.6 3.7 100 5000
7.6 3.7 100 1000
7.6 3.7 100 1000
7.6 3.7 100 1000
7.6 3.7 100 1000
7.6 3.7 100 1000
7.6 3.7 100 1000
7.6 3.7 100 1000
7.6 3.7 100 1000
7.6 3.7 100 1000
Concrete,
reinforced Steel
concrete
3x
Diameter
5 cm
of the nail
shaft
10x 5x
Diameter Diameter
of the nail of the nail
shaft shaft
35