Heading: The direction you are traveling in relation to North. In
Waypoints Mode you can view a graphical heading when you
activate the Track Back function.
Numeric
heading in
Navigate
Mode
Bearing: Direction to a target. Bearing information only
appears when you operate the Track Back feature and is
indicated by a house graphic.
Track Back: The Track Back feature allows you to navigate to a
stored waypoint from your current position.
Waypoints Mode functions
Waypoints Mode displays positional information and allows you to
store up to 10 waypoints to mark specific navigational locations
during your activity. Your current location will always be marked
with CURRENT.
When you store waypoints, you can select a label from a list of pre-
sets included with the Watch. Pre-set labels include: WAYPNT #
(where # equals the waypoint number), JCT, HOME, START,
FINISH, CAMP , TRAILHD, PEAK, or VISTA.
38
Waypoints Mode includes the Track Back feature that allows you
to navigate from your current position to a stored waypoint.
Waypoints Mode does not operate in conjunction with the
chronograph. This mode displays and automatically updates
Graphical
current positional information, but does not keep time. In addition,
heading
using Track
Waypoints Mode does not display any performance data.
Back in
NOTE: Waypoints Mode will not operate without the use of the
Waypoints
Mode
TO OPERATE WAYPOINTS MODE
1. Press MODE until Waypoints Mode appears.
2. Begin moving. The Watch automatically updates displayed
TO STORE A WAYPOINT
1. Press and hold START/SPLIT to store a waypoint.
2. Press
3. Press DONE (MODE) to store the waypoint.
4. Repeat steps 1 through 3 to store up to nine other waypoints.
GPS-3D Sensor. If the GPS-3D Sensor is not operational,
you will receive the message NO GPS DATA.
positional information.
+
-
(DISPLAY) or
(STOP/RESET) to scroll
through the nine pre-set waypoint labels.
+
A plus (
) sign will appear above the START/SPLIT key if
the Watch has room for more waypoints.
39