Pairing Bluetooth Devices - Siemens easyTek Manual Del Usuario

The setup depends on the device type:
Standard line-in devices and FM receivers must only be
■
plugged in.
Bluetooth phones and Bluetooth audio devices must
■
be paired once before audio streaming is possible.
Refer to section "Pairing Bluetooth devices".
Our transmitters must also be paired once, but
■
the procedure is slightly different.
Refer to section "Pairing our transmitters".
Further information:
FM receivers: The same signal is transmitted to both
■
hearing instruments (mono sound).
Transmitters: You can also use third-party transmitters.
■
easyTek treats them like other Bluetooth devices.
We recommend to use our transmitters.
18
All manuals and user guides at all-guides.com

Pairing Bluetooth devices

Every Bluetooth device has to be paired once with
easyTek. After that, the connection is automatically
established when easyTek is turned on and the Bluetooth
device is within operating distance.
Bluetooth devices are, for example, Bluetooth phones, TV,
tablets or third-party transmitters.
The procedure for pairing and using our
transmitters is slightly different.
Refer to section "Pairing our transmitters".
Preconditions:
Bluetooth device is turned on.
■
easyTek is turned on.
■
Neckloop is plugged into both sides, and easyTek is
■
worn around the neck.
19