Wearing Easytek Properly; Pairing Hearing Instruments With Easytek - Siemens easyTek Manual Del Usuario

Wearing easyTek properly

In order to function correctly, you must wear easyTek
with the neckloop around your neck. The neckloop is also
the antenna.
Unplug one neckloop plug and place the neckloop
X
loosely around your neck
Insert both neckloop plugs all the way
X
10
All manuals and user guides at all-guides.com
➊
.
➋
.

Pairing hearing instruments with easyTek

Your hearing instruments have to be paired once with
easyTek. After that, the connection is automatically
established when your hearing instruments and easyTek
are turned on.
Preconditions:
Both hearing instruments are turned off
■
(the battery compartments are open) and
within operating distance.
easyTek is turned off.
■
Neckloop is plugged into both sides,
■
and easyTek is worn around the neck.
Pairing:
Press until the green LED turns on
X
This takes approximately 2 seconds.
easyTek searches for hearing instruments
nearby .
Turn on the hearing instruments while the green LED
X
is flashing : Close the battery compartment.
If you are wearing two hearing instruments, both
instruments must be turned on.
.
11