KALLISTA P70001-00 Guia De Instalacion página 5

Install the New Toilet (cont.)
CAUTION: Risk of product damage. Do not overtighten the
nuts. Overtightening may cause breakage or chipping of vitreous
china.
Carefully tighten the nuts.
Measure the length of each T-bolt from the top of each nut. If the
T-bolts extend more than 1/4" (6 mm) over the top of the nuts,
the excess must be cut off with a hack saw.
Remove the Excess T-Bolt Length (if applicable):
Mark 1/4" (6 mm) over the top of the nuts.
Remove the nuts from the T-bolts, then the T-bolts from the closet
flange.
CAUTION: Risk of product damage. Protect the product from
exposure to the hacksaw blade when cutting off excess T-bolt
length.
Cut off the excess length from the T-bolts with a hacksaw.
File the end threads of the T-bolts to ease the installation, if
necessary.
For All Installations:
Attach the bolt caps to the T-bolts.
Kallista 5 1008379-2-A