Fusion 782-1730 El Manual Del Propietario página 15

7) Ensure that all electrical connections have been tightened
and turn on the inverter.
8) Plug the AC product(s) you wish to operate into the AC
outlet(s) and switch them on one at a time.
(See caution before turning on the AC products).
• cautIon:
As the battery is used, its voltage begins to fall. When the inverter
senses that the voltage at its DC input has dropped to the range
of 10.7-11,3V DC, an audible alarm sounds. This allows time for
computers or other sensitive devices to be shut down. If the
audible alarm is ignored, the inverter will automatically shut
down when the voltage drops to the range of 10.2-10.8V DC,
preventing the battery from being over-discharged. Turn off any
devices that the inverter is powering. When input voltage rises to
11.7V-12.3V DC, inverter restores back to normal. Although the
inverter incorporates protection against over-voltage, it may still be
damaged if the input voltage exceeds 16 volts.
• cautIon:
Most vehicle batteries are designed to provide short period of very
high current for starting the engine. They are not designed for a
constant "deep discharge." Constantly operating the unit from a
vehicle battery until the low voltage shut off will affect the life of
the battery. If you are operating electrical products for extended
periods of time, you should consider connecting the unit to a
separate deep discharge battery.
• cautIon:
The cable sizes given are a general recommendation. Before
beginning each specific installation, you should always consult
your National Electrical Code. Check for loose connectors. Check
to make sure you have not reversed the polarity.
InverterManual_012411.indd 15
All manuals and user guides at all-guides.com
15
1/31/11 8:43:21 AM