Preparation For Use - SOUNDMASTER High Line UR 2150USB Manual Del Usuario

PREPARATION FOR USE

INSTALLING THE UNIT UNDER A CABINET
. Mark the position of the 3 holes by using the supplied template. Use a drill to make the
holes.
. When the cabinet door overhangs the shelf and obstructs the unit, you can adjust the
unit/shelf height.
3. Install the unit with the supplied mounting screws.
Caution:
Please read the following before installing the unit.
• Since the unit is heavy, be careful when installing the unit.
• To reduce the risk of fire, do not place any heating or cooking appliance beneath this
unit.
• Install the unit so that its AC power cord can be connected directly to a wall outlet. Do
not use a converter or extension cord.
• Be sure that the AC power cord has no slack when using the unit. If the AC power cord
has some slack, wind it up to the cord hook until the cord has no slack.
• The unit has a built-in ferrite bar antenna for AM radio reception. Check the condition of
AM reception before fixing in position.
• Install the unit as far as possible from a source of noise. (for example, refrigerator,
microwave oven, fluorescent lamp, etc.)
• Use tools carefully while installing of the unit.
• To reduce the rish of fire or electric shock, do not touch the AC power cord with wet
hands.
08B UR50USB IB 37.indd 3
GB - 3
00/5/4 0:45: AM