EN
During maintenance, makes sure to:
• Do briefing and checking the knowledge of the rules of operation of the personnel operating
the machine.
• Interview the personnel operating the machine to identify the abnormal operation of the
machine.
• Visually inspect the machine condition.
• Check for bared wires.
- Check the integrity of the earthing line and the earthing circuit of the machine (from the
earthing terminal to accessible metal parts - resistance should not exceed 0.1 Ohm).
• Pull current-carrying contact groups, sensors, relays/contactors, thermal/current protection
and other emergency shutdown elements, heating elements, signaling fittings, liners,
fasteners, moving parts of the machine (if any).
• The machine should be repaired by skilled technical personnel.
• No design modifications should be made to the machine.
• In the event of abnormal operation of the machine, power off the machine by turning the
main switch to the OFF position or by unplugging the plug from the socket, shut off the water
supply (if any), and contact the service department.
• It is strictly forbidden to operate a machine that is known to be faulty.
• The Seller and the Manufacturer may not be held liable for any direct or indirect damages
that may result from an accident or from operating a defective machine.
• Regularly lubricate the bowl seal and tap seal using a food-grade lubricant or Vaseline.
• Do not clean the machine using any abrasive materials, metallic sponges and brushes,
piercing and cutting items, aggressive and chlorine-containing cleaning agents, gasoline, acids,
alkalies, and solvents.
• If the machine is not be used for an extended time (weekends, holidays, etc.), disconnect
the power supply and clean it thoroughly.
The machine should be repaired by skilled technical personnel.
No design modifications should be made to the machine.
In the event of abnormal operation of the machine, power off the machine by turning the
main switch to the OFF position or by unplugging the plug from the socket, shut off the water
supply (if any), and contact the service department.
It is strictly forbidden to operate a machine that is known to be faulty.
The Seller and the Manufacturer may not be held liable for any direct or indirect damages
that may result from an accident or from operating a defective machine.
8. Transportation and storage Disposal
27