Output (Ec799B Only) - Starrett EC799 Manual Del Usuario

OUTPUT (EC799B ONLY)

• The EC799B Series caliper comes with an output port (14)
that allows data transmission to computers or printers
using the appropriate Starrett cable/ adapter or Starrett
DataSure
• The output connection is at the top of the caliper pointed
out in Fig.14. The output cover slides open, place your
finger into the small area with the arrows and push
towards the slide locking screw (8) pointed out in Fig.15.
When not using an output cable remember to keep this
cover closed, so that no debris collects in the output,
possibly interfering with data collection from your tool.
• The output command is controlled by the "IN/mm" button (13).
wirelles interface.
®
Output Cover
Output Connector
Open
ENGLISH
PKG08800-UMEC799
Fig. 14
Fig. 15
15