Using The Ironer; Making The Appliance Ready For Use; Ironing; Ironing Temperature - Miele professional PRI318 Instrucciones De Uso

Making the appliance ready for use

Turn on the on-site main switch for the power supply.

Press the  button to switch on the ironer.

The red  symbol flashes.
Now gently press the underside of the finger guard.

The ironer switches to normal operating mode.
The ironer is only ready for use if the finger guard has been actuated properly. Otherwise,
the ironer will switch off again after a short amount of time.
The red  symbol will appear in the display and the heater plate will heat up.
 Risk of burns when touching the hot heater plate.
When the machine has heated up, there is a danger of burns on the edge of the heater
plate. Warning labels on the outer casing of the heater plate indicate the danger of
burns.
Avoiding touching the edges of the heater plate.
Wait until the selected temperature has been reached.

The  button begins to flash as soon as the minimum temperature has been reached.
The flatwork ironer is ready for operation when the set temperature is reached and the
 symbol no longer appears in the display.
Now press the flashing  button to start up the ironer.

The ironer is now ready for use.

Ironing

Whilst ironing, the laundry is fed into the ironer using the laundry infeed table. The ironed
laundry is removed from the other side. The laundry pickers pick off the laundry from the
roller after ironing. The laundry can then be folded together on the outfeed table.
 Risk of burning due to hot laundry and hot edges of the heater plate outfeed.
While the ironer is in use, the heater plate becomes very hot. Ironed laundry may also be
very hot when it emerges from the heater plate.
Always take care when removing ironed laundry from the appliance.
Do not touch the edges of the heater plate outfeed.

Ironing temperature

The ironing temperature should be selected according to the type of fabric being ironed.
Fabric
Nylon/artificial silk
Silks/woollens
Cottons/linens
Symbol



en - Using the ironer
Temperature
100–110 °C
111–150 °C
151–185 °C
Preset value
110 °C
125 °C
180 °C
35