Flush Procedure - GE GX1S50R Manual Del Propietario E Instalación

Ocultar thumbs Ver también para GX1S50R:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

REPLACING THE FILTER CANISTER
The amber light in the faucet base will flash
every 30 seconds to indicate a filter change
is needed. This occurs every 6 months. TO
PROPERLY MAINTAIN SYSTEM AND REDUCE
THE RISK OF PROPERTY DAMAGE DUE
TO WATER LEAKAGE, CHANGE FILTER AS
REQUIRED.
NOTE: A small amount of water from the
canister. Install the new canister into the manifold
alignment marks line up and the filter stops.
DO NOT OVERTIGHTEN.
it is turned.
purge from the system.
NOTE: System may make noise during this
procedure.
4. Check for water leaks around the system.
present.
leaks.
Replacement Filter Canister/Estimated
Replacement Costs
49-6000026
Installation Instructions

FLUSH PROCEDURE

through the GE Water Filtration system, the filter
system flushed.
WARNING
the ingestion of contaminants, do not use with water
cysts.
Circumstances that may require flushing the
system are:
• Boil water advisory
• Flooding of the GE Water Filtration system
The procedure for flushing the GE Water
Filtration system is:

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido