INSTALLING THE TUBING
smoothness, cuts, nicks, flat spots and sharp
2.
inlet and outlet. Failure to follow will result in
water leaks when filter canister is removed.
manifold until the line is flush with the fitting
tubing, depress and hold white collet; pull
tubing out to remove.)
White Collet
Insertion line
inlet side of the manifold to the feed water
adapter.
NOTE:
sure there are no imperfections and that the
Installation Instructions
(To remove
3
"
4
Engagement
INSTALL THE BATTERY
2.
a proper installation and system reset. If the
4.
indicating the time to replace the filter canister.
NOTE:
replaced with every filter change.
Faucet Base
WARNING
49-6000026