Descargar Imprimir esta página

OHAUS i-DT61XWE Manual De Instrucciones página 4

Ocultar thumbs Ver también para i-DT61XWE:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 9
EN-2
INSTALLATION
Install the power bank sealing kit.
1.
Loosen the four fastening screws on top of the battery sealing box.
2.
Take out the upper cover and connect the two USB harnesses to the
corresponding ports on the power bank (power bank should be prepared by
users).
3.
After the wiring harness is connected, put the power bank into the metal shell.
Close the upper cover and tighten the four fastening screws.

Publicidad

loading