Protecting The Environment - DeWalt DWE6421 Manual De Instrucciones

Lijadora roto órbital de 5" (125 mm)
Ocultar thumbs Ver también para DWE6421:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

unit is lifted from the work surface. These parts are available at extra
cost from your local dealer or authorized D
1. Holding the platen firmly, remove the four screws (M) from the
bottom of the pad.
2. Remove the pad (E).
3. Replace worn or damaged belt (K) by wrapping it around the
shoulder screw (I) and bearing retainer (J) as shown in Figure 6.
4. Reinstall pad (replace with new pad if necessary). Replace the four
screws (M). Be careful not to over-tighten screws.
FIG. 6
E
H
Lubrication
Self lubricating bearings are used in the tool and periodic relubrication
is not required. However, it is recommended that, once a year, you
take or send the tool to a service center for a thorough cleaning and
inspection.
WALT service center.
e
M
I
K
J
L
Cleaning
WARNING: Blow dirt and dust out of the main housing with dry air
as often as dirt is seen collecting in and around the air vents. Wear
approved eye protection and approved dust mask when performing
this procedure.
WARNING: Never use solvents or other harsh chemicals for
cleaning the non-metallic parts of the tool. These chemicals may
weaken the materials used in these parts. Use a cloth dampened only
with water and mild soap. Never let any liquid get inside the tool; never
immerse any part of the tool into a liquid.
Repairs
To assure product SAFETY and RELIABILITY, repairs, maintenance
and adjustment (including brush inspection and replacement) should
be performed by authorized service centers or other qualified service
personnel, always using identical replacement parts.
Accessories
WARNING: Since accessories, other than those offered by
D
WALT, have not been tested with this product, use of such
e
accessories with this tool could be hazardous. To reduce the risk of
injury, only D
WALT, recommended accessories should be used with
e
this product.
Recommended accessories for use with your tool are available at extra
cost from your local dealer or authorized service center.

Protecting the Environment

Separate collection. This product must not be disposed of
with normal household waste.
Should you find one day that your D
or if it is of no further use to you, do not dispose of it with household
waste.
28
WALT product needs replacement,
e

Publicidad

Tabla de contenido
loading

Tabla de contenido