Filling The Cartridge - Prebena KT-1000 Manual De Instrucciones Original

Servicing cartridge
To remove light dirt from the cartridge housing, proceed as follows:
 Wipe off the cartridge with a cloth that is slightly moistened with
mild soap suds.
 Then wipe off the cartridge with cloth that is slightly moistened
with tap water.
 Finally wipe the housing dry with a soft, dry cloth.
To clean the valve, proceed as follows:
 Wipe off the outside of the valve with a cloth that is slightly
moistened with mild soap suds.
 Then wipe off the outside of the valve with a cloth that is slightly
moistened with tap water.
 Finally wipe the outside dry with a soft, dry cloth.
The cartridge is only to be cleaned with the described means.
 If you can not clean the cartridge as described, please send it to
the manufacturer.

Filling the cartridge

The cartridge can be filled by using compressors of the
PKT-FILLMASTER series, available as accessories, and adapter
ET No. 00205801.
12
CAUTION
The cartridge may be damaged by improper
cleaning agents.
 For cleaning, only use a cloth that is dry,
slightly moistened or moistened with mild
soap suds.
WARNING
There is a risk of an explosion if the valve is
damaged.
 Do not clean the valve with hard or sharp
objects.