Repairing Faults - Prebena KT-1000 Manual De Instrucciones Original

Repairing faults

Repairing faults
Symptom
Air escapes audibly from
the tacker safety valve.
Air escapes audibly at
the connection for the
cartridge.
Triggering is not
possible.
If the malfunction continues to persist, contact your dealer or the
manufacturer (see Page 16).
14
Possible cause
The operating
pressure is too high,
the tacker is damaged.
The cartridge has
become loose because
of vibrations.
The seals at the
connections for the
cartridge are defective.
The operating
pressure is too low.
Corrective measure
 Disconnect the cartridge
from the tacker
(see Page 10).
 Send the cartridge and
the device via the dealer
to PREBENA
(see Page 16).
 Screw in the cartridge
hand tight into the
connector (see Page 9).
 Connect a new cartridge
(see Page 9).
 Send the cartridge via
the dealer to PREBENA
(see Page 16).
If the problem persists,
 send the tacker via the
dealer to PREBENA
(see Page 16).
 Connect a new cartridge
(see Page 9).