SANUS VuePoint F11c Manual De Instrucciones página 13

3. Remove the wall plate template
CAUTION:
Be sure the anchors
4. Install wall plate using two lag bolts
16
CAUTION:
Improper use could reduce the holding power of the lag bolt. DO NOT over-tighten the lag bolts.
NOTE: If needed, you can make small level adjustments to the wall plate by loosening the bottom lag bolt
Tighten the bottom lag bolt 17
3
and insert two anchors
15
18 are seated flush with the concrete surface.
. Tighten the lag bolts
17
when adjustments are complete.
18
.
18
only until they are pulled firmly against the wall plate
17
4
17
16
.
16
17 and shifting the wall plate until level.
17
13