Programmed Play - AEG SR 4347 Instrucciones De Servicio

English
38
Press four times = all functions are cancelled. The normal
play mode is resumed.
Only for running CDs in the MP3 format:
Press once = the current track is repeated continuously
appears in the display).
Press twice = the selected folder of the MP3 CD is
repeated continuously
appears in the display). Repeatedly press
the BAND/ALBUM button (15) to select a
folder.
Press three times = the whole CD is played continuously
ALL appears in the display).
Press four times = the display RAND appears in the display.
All the titles are replayed consecutively in
a random order.
Press five times = the function is deactivated and the CD is
played in the normal mode.
ALBUM/BAND (15)
Press this button repeatedly to change a folder upwards each
time. The display, e.g. F02 is briefly shown. The replay will
then start automatically. If you press this button in the stop
mode, you will start the replay with the
SLEEP/TIME SET (14)
When the device is switched on, you can set the time after
which the device will turn into standby mode; set the time in
10 minutes intervals from 90 to 10 minutes. The device will
turn off automatically after the preset time.
1. Keep the button pressed for ca. 3 seconds. The notifica-
tion "90" will appear in the display.
2. Press the button repeatedly to reduce the time in steps
of 10.
To retrieve the remaining time, keep the button pressed for
ca. 3 seconds.
NOTE:
The activated function is shown on the display by the
"SLEEP" message.
Alarm function (in standby mode)
Setting of the Alarm
You can set two alarm times. Proceed as follows:
1. Keep the VOL+/AL 1 button pressed for ca. 3 seconds.
The hours of the currently set alarm time start to flash.
2. Use the buttons and
3. Press the VOL+/AL 1 button for confirmation. The min-
utes start to flash.
4. Use the buttons and
5. Press the VOL+/AL 1 button to confirm. Then select how
you want to be awakened. Select from:
ALBUM
button (7).
(10) for setting.
for setting.
• BUZZ (Buzzer):
A buzzer sounds when the alarm time is reached.
The buzzer interval increases from slow to fast. The
volume cannot be adjusted.
• FM:
As soon as your set alarm time is shown, the radio
switches on. The last set station is played. The volume
increases slowly to the set volume. The volume can-
not be adjusted.
• dISc (CD):
As soon as your specified alarm time has been
reached, the device will start in CD mode. The insert-
ed CD will be played starting with the first title. The
volume will slowly increase to the adjusted volume.
6. Now select the maximum alarm volume with the
buttons.
7. Finally, press the VOL+/AL 1 button again. The first alarm
time is now activated. The adjustments are shown to you
in the display successively.
To set the second alarm time, repeat the above steps with
the VOL-/AL 2 button (13).
NOTE:
If the alarm time is activated, the respective symbol (
) will light up.
Turning off the Alarm
To turn off the alarm signal, press the VOL+/AL 1 or VOL-/
AL 2 button (13).
Automatic Alarm Interval
The automatically set alarm function can be shut off for ap-
proximately 9 minutes with the SNOOZE button (17).
NOTE:
The activated function is shown on the display by the
"SNOOZE" message.
Deactivate the Alarm Function
To deactivate the alarm function, press the VOL+/AL 1,
respectively VOL-/AL 2 button (12). The symbol " " respec-
tively " " will go out.

Programmed Play

This can be used to program any desired sequence of tracks.
1. Press the button (8).
2. Press the MODE button (9). "P01" (Storage space) and
the notification PROG will appear in the display. Use the
/ buttons (10) to select the desired track and then
press the MODE button again. The display changes to
memory slot P02.
and
or