AEG BSS 4805 Instrucciones De Servicio página 43

Select the preset radio station
You have two options to select the preset radio stations.
• The preset radio stations can be selected by repeatedly
pressing the / button (4/6).
• Enter the desired preset location with the number but-
tons (3 on the remote control). With preset locations
above 9, first press the 10+ button (4 on the remote con-
trol). Each time you push the 10+ button you will increase
the entry by 10 more preset locations.
Playing back music files
You have three options to play back your own music files with
the unit: hardwired, wireless via Bluetooth, or via the USB
port.
By cable
1. Connect the external device with a cinch cable (2x RCA)
to the AUDIO R/L jacks on the back of the speaker. If
required, use a suitable adapter (not included).
2. Repeatedly press the SOURCE button (9) until "AU-
DIO" is shown on the display. The operating indicator
light (1) will light up red. Alternately, you can also press
the AUDIO button (16 on the remote control).
3. Start the playback of your audio source. Listen to the
sound playback via the speaker. You can adjust the
volume with the VOL+/VOL- button (8 on the remote
control) or the VOLUME control (1).
4. For the further procedure, please refer to the user manual
of the external audio source.
NOTE:
If possible, adjust the volume of the external unit to a com-
fortable level.
Cordless via Bluetooth
Bluetooth involves a technology for wireless radio connec-
tion of devices over a short distance. Devices with Bluetooth
standard are transmitting between 2.402 and 2.480 GHz in
the ISM band (Industrial, Scientific and Medical). Interference
can be caused for example by WLAN-networks, DAB radios,
cordless phones, or microwave ovens which work on the
same frequency band.
This device offers you the possibility to use a Bluetooth-
enabled device. The functional radius is limited to approx.
15 metres depending on the surroundings and the unit used.
If your playing device supports the A2DP profile (Advanced
Audio Distribution Profile) and has a music-player function,
then you can also wirelessly transfer music to the device. The
A2DP profile involves a multi-vendor Bluetooth profile. By
streaming, stereo-audio signals are wirelessly transferred be-
tween the playing device (source) and the receiving device.
To remotely control the source, the playback device has to
support the AVRCP profile (Audio Video Remote Control
Profile).
Due to the different device manufacturers, models, and
software versions, a full functionality cannot be guaranteed.
• Logging on devices (Pairing)
Before you listen to music via the unit, you must pair the
devices.
1. Ensure, that the Bluetooth function is activated in
your player (e.g. mobile phone). For this, refer to the
operation manual of your player.
2. Press the SOURCE button (9) repeatedly, until
"– bt –" is shown on the display. Alternatively, you
can also press the BLUETOOTH button (17 on the
remote control). The operating indicator lamp (1)
will flash rapidly to show that the device is in pairing
mode.
3. Chose the Bluetooth menu in your player and register
the device in your player. For this, refer to the opera-
tion manual of your player. The device "BSS 4805"
will show in your player as a selection.
NOTE:
Only one playback unit can be connected to the
speaker. If the speaker is already connected to
another playback unit, the speaker will not appear
in the BT selection menu.
4. Now enter the password "0000" in your player,
depending on the device manufacturers, model, and
software version.
If pairing was done successfully, a beep will be heard and
the indicator lamp will slowly flash blue. If the connection for
the audio playback has been completely established, then
a beep will sound again and the indicator lamp will light up
blue.
For operation, please refer to the section "Description of the
controls".
If possible, adjust the volume of the external unit to a com-
fortable level
NOTE:
• Depending on the device manufacturer, you need to
perform the registration (PAIRING) again to connect the
devices.
• In case of problems during repairing of a playback
device, deactivate the WiFi-/ and mobile data function
in your playback device.
• The Bluetooth compatibility cannot be ensured for
devices (e.g. mobile phones) getting released in the
future.
• To ensure an optimal connection, make sure that the
battery of your player is completely charged.
• Some of the mobile phone brands have an energy-
saving mode. Deactivate the energy-saving mode as
it can otherwise result in problems during the data
transfer through Bluetooth.
English
43