Metra 99-9309 Manual Del Usuario página 5

8
Remove the (2) screw covers inside
the vent above the speedometer
then remove the (2) T-20 Torx
screws uncovered. (Fig. G)
9
Remove the speedometer trim panel
and disconnect hazard switch. (Fig. H)
10 Remove (3) T-20 Torx from under
drive knee bolster and remove
panel. (Fig. H)
11 Remove panels from driver and
passenger side of center stack.
Remove (2) T-20 Torx from each
side of center stack. (Fig. I)
12
Unclip trim panel from bottom of
center stack and remove (1) T-30
Torx. (Fig. I)
99-9309 DASH DISASSEMBLY
MINI COOPER
G
H
I
Continue to PG.4...........................
3