Metra 99-9309 Manual Del Usuario página 8

1
Place blank out plate from kit in
speedometer and secure using (4)
T-20 Torx removed in step 19. (Fig. A)
2
On vehicles without automatic
climate control place button blanks
in kit before securing climate/window
controls in kit using (4) T-20 Torx
removed in step (16). (Fig. B)
3 If desired, mark trim panel removed in
step (14) ½" above bend and trim off
top portion for use after installation is
completed. (Fig. C)
99-9309 KIT PREPARATION
MINI COOPER
A
B
C
TRIM LINE
6
TRIM LINE