babymoov Transat Cosmic Dream Manual De Instrucciones página 8

- Slip the support base onto the support bar and press firmly until you hear a click (fig. 5). Pull on the support base to make
sure it is slotted fully home.
Fixing the cushioned liner (raspberry and blue versions)
- To fix the cushioned liner into the recliner seat, insert the 3 straps of the safety harness through the corresponding holes in the
cushion (fig. 6 et 7).
- A 3-point safety harness is provided so you can attach your baby safely in the seat. Push the two clips on the side straps into
the central part until you hear a click (fig. 8).
- To take your baby out of the seat, push on the two buttons each side of the central part to release the harness.
Fixing the head hugger cushion (black/orange version)
- To fix the head cushion to the recliner seat, take the cushion strap through the space provided and attach it to the back of the
seat (fig. 9). You can adjust the height of the head cushion by adjusting the position of the velcro.
Fixing the toy bar (raspberry and blue versions)
Insert the toy bar on the seat part of the recliner (fig. 10). The toy bar can only be inserted in one direction, so if it doesn't fit at
first, turn it round the other way.
Fixing the canopy (raspberry and blue versions)
To fix the canopy to the recliner seat, clip it on each side of the seat using the two clips at each end of the canopy (fig. 11).
Adjusting the tilt of the recliner seat
Press on the 2 adjustment buttons each side of the seat while tilting the seat to the desired angle (fig. 12). Then release the buttons
and check that the seat is locked in position by trying to push the back up and down slightly.
Using the music and vibration box
- Before you can operate the music and vibration box, you need to insert the batteries in their compartment located underneath
the seat base. Use a flat screwdriver (not supplied) to remove the battery cover (fig. 13). Insert three AA batteries (not supplied)
and fit the cover, tightening the screws back home using the screwdriver. Do not over-tighten.
- Push on the "power" button
Press the "music" button
button and choose the tune you want.
Press the "vibration" button
Press these buttons again to switch off the functions as required.
When the recliner seat is not in use, check that the "power" button
Connecting an MP3 player
Open the pocket on the back of the seat and take out the jack cable. Plug one end of the cable in the jack socket located at one
end of the music and vibration box. Connect the other end of the cable to your MP3 player (fig. 15). You can also put the MP3
player (not supplied) in the little pocket on the back of the seat (fig. 16).
Safety wedge
There is a safety wedge underneath the recliner seat support base which helps to stabilize the recliner seat. For maximum safety
we recommend it should be in the working position at all times. To do this, simply pull it downwards (fig. 17).
Composition
• Aluminium.
• Seat: 100% cotton and 100% polyester suedette (raspberry version).
• Seat: 100% cotton and 100% polyester velvet (blue version).
• 100% polyester (black/orange version).
Washing instructions
You can wash the surface of the cushioned liner,
head hugger and recliner seat cover. Use a damp
cloth and soap.
All manuals and user guides at all-guides.com
to switch the unit on (fig. 14).
to start the music box function (fig. 14). The music box has 6 tunes; to change tune press the "music"
to start the vibration function (fig. 14).
COSMIC DREAM RECLINER SEAT • Instruction Manual
is switched off.
CARE
rIajn
9