4
2
5
6
1
1
3
3
4
2
7
A
Scope of delivery:
1x radiator guard set, left/right
4x hex flange screws M6x15
2x hex flange screws M6x40
2x washers A6.4
2x aluminum collar bushing
Preassembly
- Remove the seat, tank and spoiler.
Note for Husaberg:
The tank does not need to be removed.
In models with a horn, remove the horn.
- Remove the radiator shield (4).
- Remove the screws M6x12 (1) and pull the radiator from the frame.
Assembly
- Position the radiator guard (2) between the frame and radiator and attach
it using the included screws M6x15 (3).
- Mount the radiator shield (4) and tank with the tank spoiler
- Mount the collar bushing (6) in the tank spoiler in the direction of the arrow
(Fig. A).
NOTE:
Let the collar bushing engage in the tank spoiler plastic.
- Position the tank spoiler between the radiator bracket (5) and the radia-
tor guard (2).
- Attach the tank spoiler with the included screws M6x40 (7) and the was-
hers.
Note for Husaberg:
In models with a horn, mount the horn as well.
Final assembly
- Mount the seat.
NOTE:
Adjust the steering angle on the left and right so that the fork does not come
in contact with the guard when the handlebar is turned.
0024060156
0015060403
0021060003