Functional Description; Cable Length - SPIT DWS 225 Manual De Instrucciones

FUNCTIONAL DESCRIPTION

This Spit drywall sander DWS 225 is specially designed for the most efficient sanding of
drywall or plaster walls and ceilings for both new construction and renovation work.
It is designed to work in conjunction with the Spit vacuum cleaner AC 1600 for minimum
dust and best sanding results. The pivoting sanding head allows excellent results with
minimum time and effort.
Electrical connection
The network voltage must conform to the voltage indicated on the nameplate of the tool.
Under no circumstances should the tool be used when the power supply cable is
damaged.
A damaged cable must be replaced immediately by an authorized Spit Service Center.
Do not try to repair the damaged cable yourself. The use of damaged power cables can
lead to an electric shock.
Extension cable
If an extension cable is required, it must have a sufficient cross-section so as to prevent
an excessive drop in voltage or overheating. An excessive drop in voltage reduces the
output and can lead to failure of the motor. The following table shows you the correct
cable diameter as a function of the cable length to this machine.

Cable length

in m²
7.5
15.0
22.5
30.0
60.0
90.0
Table 1
Unpacking
Carefully remove the tool and all loose items from the shipping container.
Retain all packing materials until after you have inspected and satisfactorily operated
the machine.
Rated current under load (ampere)
0,2 2.1 - 3.4 3.5 - 5
1,5 1,5
1,5 1,5
1,5 1,5
1,5 1,5
1,5 1,5
1,5 2,5
Conductor cross-section - cable 2 x mm²
5.1 - 7 7.1 - 10
1,5 2,5
1,5 2,5
1,5 2,5
1,5 2,5
1,5 2,5
2,5 4.0
10.1 - 16
2,5 4.0
2,5 4.0
2,5 4.0
2,5 6.0
4.0 6.0
4.0 8.0
GB
3 3