LUND Running Board Bracket Kit 2015-16 Ram 1500 Instrucciones De Instalación página 4

Installation Steps
Install Plastic Insert on Bolt Plate as shown.
8
Align the Middle Bracket with Bolt Plate stud. Secure the Middle Bracket to the Bolt Plate using (1) Nut.
Nut used to
secure Middle
Bracket to Bolt
Plate in rocker
panel
Middle Bracket
10
Install (2) bolts with (2) washers in the pinch weld from the OUTSIDE, and secure with (2) Nuts. NOTE: Do NOT fully tighten
Middle Bracket
11
NOTE: Actual application may vary slightly from illustrations.
Fig.8
NOTE: Do NOT fully tighten at this time.
Carefully use the Plastic Insert to install the Bolt Plate
through the rocker panel mounting hole as shown.
NOTE: Use extra caution not to drop the Plastic Insert
and Bolt Plate inside the rocker panel.
9
Fig.10
at this time.
(2) bolts with (2) washers
and (2) nuts installed in
pinch weld
Repeat Steps 6 -11 for the Rear Bracket.
Fig.11
Page 4 of 5
Fig.9
bolt
nut
washer
pinch weld