Main Screen; Adjusting The Temperature; Configuration Menu - Airzone Easyzone ZS6 Manual Del Usuario

Main screen

Access the main screen by pressing "Airzone" from the screensaver:
User Mode
Operation mode
EN
Zone
Temperature
Relative humidity
Settings menu
Local Ventilation
Main screen/
confirm

Adjusting the temperature

On/Off. Press to turn the zone On/Off.
23° Temperature Control.The temperature displayed on the screen is the current set point
temperature. Adjust the set point temperature on the Think Thermostat following the next
instructions:
Select the set point temperature using the control bar (by pressing or by sliding) to manually
adjust by increments of 0,5º C (1 ºF). Press once to adjust the set point temperature by
increments of 0,5º C (1 ºF). Slide to adjust the set point temperature in larger steps.
he permitted temperature range is:
•
Heating Mode: 15 ºC – 29 ºC (59 - 84 °F).
•
Cooling Mode: 18 ºC – 30 ºC (59 - 86 °F).
Note: Press the Airzone button to switch between heat and cool set point temperatures.
There is a minimum difference allowed between heating and cooling set point temperatures.
The system will prevent setting a temperature within the protection range.

Configuration Menu

Local Ventilation. This option enables the activation
in the selected zone when the system is not actively cooling or heating any of the zones.
Important: In Heat Pump installations, it is recommended not to activate the global and local
ventilation in an Airzone system connected to the master indoor unit. It may cause the Stop
user mode to turn off the rest of the Airzone system.
8
Communication frequency:
- 868.12 MHz (CEE)
- 915.2 MHz (EEUU, Canada, Australia, New Zeland)
Maximum radiated power: 0 dBm
Airflow
control
Control bar
Set-point
temperature
Zone
demand
Timer
On/Off
or deactivation of the ventilation