BICYCLE HOLDER, TOWBAR MOUNTED
Transportation
en-GB
22
–
Install the bicycle(s) on the bicycle holder.
Overlap the bicycles if more than one
is to be loaded onto the holder with the
heaviest bicycle innermost.
–
Check that the handlebars of the inside
bicycle do not make contact with the car's
tailgate. If necessary, loosen and turn the
handlebars, or move the bicycle out one
position.
NOTE
Remember that exhaust gases from the car
are hot, and may affect the bicycle holder
or its load. This applies in particular to the
parts made of plastic. If necessary, the
exhaust gases should therefore be routed
away from the bicycle holder.