Oxford Aqua Serie Manual De Instrucciones página 6

All manuals and user guides at all-guides.com
GB
TANK BAGS
INCLUDED:
• 1 Tank bag • Headstock strap
FITTING INSTRUCTIONS:
Before fitting your tank bag, always ensure that the tank is completely free from any dirt. This is
because even the finest of residue can lead to marking of the tank. It is also advisable to clean the
bottom of the bag every time before use (traces of metal could be attracted to the magnets)
TO FIT:
1. Hold the bag with the headstock strap facing towards the headstock and gently set the base
of the bag onto the tank. The base is magnetic and will therefore secure the bag to a steel
tank. The position of the magnets may be adjusted slightly in order to suit the shape of the
tank – simply manoeuvre the magnets within their individual pockets before attaching the bag.
2. Pass the headstock strap around the headstock and clip together. This acts as a secondary
securing device and must be used.
3. Ensure that the bag is securely fastened before setting off.
WARNING
• Do not overload – maximum recommended loading capacity 5kg.
• It is the owner's responsibility to ensure that the luggage is attached in such a way that
it does not damage or put at risk the owner or any property of the owner.
• Do not exceed the UK legal speed limit. This product has only been tested for use at UK road
legal speeds.
PLEASE NOTE:
• If the luggage is not attached securely, it may become detached and cause an obstruction that
could lead to serious injury and even death.
• Do not leave the tank bag on the fuel tank over-night or for longer periods. The non-slip base
material under the magnets may leave PVC residue which can damage certain lacquers and
stain the paint finish. Once the bag is removed, wipe the tank with a polishing cloth to remove
any residue.
6