ENGLISH
14
6
QP6510: remove the cover of the printed circuit board with the
screwdriver.
7
Remove the printed circuit board from the inner body with the
screwdriver.
8
Lift the battery out of the inner body with the screwdriver.
The battery is connected with double-sided tape.
Be careful, the battery strips are very sharp.
Guarantee and support
If you need information or support, please visit www.philips.com/
support or read the separate worldwide guarantee leaflet.
Guarantee restrictions
The blade is not covered by the terms of the international guarantee
because they are subject to wear.
Troubleshooting
This chapter summarises the most common problems you could encounter
with the appliance. If you are unable to solve the problem with the
information below, visit www.philips.com/support for a list of frequently
asked questions or contact the Consumer Care Centre in your country.