Shark ION X40 IR140 Serie Manual Del Propietário página 4

CHARGING THE ION POWER PACK BATTERY
USING THE ION POWER PACK CHARGER
USING THE ION POWER PACK CHARGING DOCK
Connect ION Power Pack Battery Charger to the
Charging Dock by inserting into hole and turning
clockwise to lock.
NOTE: Not all units come with the charging dock. See enclosed Quick Start Guide for your configuration.
s h a r kc l e a n . c o m
OR
IN THE VACUUM OUT OF THE VACUUM
1
Place battery onto dock, then connect charger to
wall outlet.
SMART RESPONSE™ TECHNOLOGY
Surface Settings
CARPET
For carpets.
FLOOR
For bare floors and
small area rugs.
2
PLEASE NOTE: Use of ION BOOST mode will drain your ION Power Pack faster.
NOTE: For deep cleaning per ASTM F 608 (embedded dirt in carpets) please select CARPET and ION BOOST settings.
NOTE: Select Carpet setting for stuck-on dirt and debris.
Power Button Suction Settings
For everyday cleaning.
1-minute boost of increased
suction for high-traffic
areas and heavy messes.
To use ION BOOST
than 1-minute, you
ION
ION BOOST button.
hold ION BOOST for
long as you need it
s h a r kc l e a n . c o m
ION POWER
ION BOOST
Press for a timed
mode for longer
can re-press the
ION BOOST
button when
the 1-minute
period ends.
You can end
ION BOOST
mode prior to
the 1-minute
by pressing the
Press and
manual control of
the mode for as