LAVOR Pro INDEPENDENT 1900 Manual Del Usuario página 22

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 46
EN
7. Push the choke lever to the OFF position OFF (Fig.
11).
NOTE
Do not the choke if the engine is warm or the
air temperature is high.
8. Let the throttle lever to the FAST position (Fig. 12).
9. Start the engine.
a) Push the engine switch to the ON position (Fig. 13).
b) Pull slightly the starting rope handle (Fig. 12) up until feeing
anti-action, and then make a rapid pull.
CAUTION
Return the starting rope handle gently to prevent damage
to the starter.
10. Gradually move the choke lever to the OPEN position. Warm
up the engine until it runs smoothly (Fig. 11).
CAUTION
The engine oil alarm is designed to alarm the user the fact that the engine oil in the
crankcase is insuffi cient. Once oil level in the crankcase is too low, the engine oil alarm
will stall the engine automatically to make it free of damage while the engine switch is
still at "ON".
CAUTION
The washer machine has to operate with clean water, in order to avoid any damages to
the washer machine itself.
22
Chock lever
ON
OFF
fi g. 11
Handle
Throttle lever
ON
Engine switch
Slow
Fast
fi g. 12
OFF
ON
fi g. 13

Publicidad

Tabla de contenido
loading

Tabla de contenido