WARRANTY CONDITIONS
All our machines are subjected to strict tests and are covered against manufacturing defects in
accordance with applicable regulations (minimum 12 months). The warranty is eff ective from
the date of purchase. If your device or accessories are handed in for repair, a copy of the receipt
must be enclosed. Guarantee repairs are being made on the following conditions: - That
defects are attributable to fl aws or defects in materials or workmanship. - That the directions
of this instruction manual have been thoroughly observed. - That repair has not been carried
out or attempted by other than authorized service staff . - That only orignal accessories have
been applied. - That the product has not been exposed to abuse such as knocks, bumps or
frost. - That only water without any impurities has been used. - That the high pressure washer
has not been used for rental nor used commercially in any other way. The following are not
included in the warranty: - Parts subject to normal wear. - The high-pressure tube. - Accidental
damage, caused by transport, neglect or inadequate treatment, incorrect or improper use and
installation failing to comply with the indications in the instruction manual. - The warranty
shall not cover any cleaning operations to which the operative components may be subjected.
Repairs under this guarantee include replacement of defective parts, exclusive of packing and
postage/carriage. The warranty shall not cover replacement of the machine or extension of the
guarantee resulting from a breakdown. The manufacturer declines all responsibility for damage
to persons or property caused by bad installation or incorrect use of the machine.
CAUTION! Failures, such as clogged nozzles, valves and mechanism blocked due to limestones,
damaged pressure cleaner accessories (like kinked high pressure hose) and/or appliances
normally working without any defects ARE NOT COVERED BY THE WARRANTY. This pressure
cleaner is intended to be used for domestic and hobby work: THE WARRANTY DOES NOT COVER
ANY OTHER DIFFERENT KIND OF USE.
WATER DIAGRAM
1) Water supply
2) Thermal valve
3) High-pressure water pump
4) Internal by-pass valve
5) Cleaning agent container
6) High pressure hose
7) Gun
8) Gun trigger
9) Lance
10) Nozzle head
11) Nozze
CE CERTIFICATE OF CONFORMITY
The underwrite company:Lavorwash S.p.A
via J.F.Kennedy,12 Italy
46020 Pegognaga (MN)
Declares under its responsability that the machine:
PRODUCT: High pressure cleaner
MODEL / TYPE: Independent 1900
complies with directives 98/37/CE(until 28 Dec 2009), 2006/42/EC(from 29 Dec 2009), 2002/44/EC, 2004/108/EC,
2002/88/EC and subsequent modifi cations.
2000/14/CE: LwA measured
LwA guaranteed 101 dBA . Conformity assessment procedure according to Annex V.
EN 60335-1:02+A11:04+A2:06+C1:06+A12:06+A1:04+C1:07, EN 60335-2-79:04:04+A1:06+A2:07, EN 55012, CISPR 12,
EN ISO 12100-1:05, EN ISO 12100-2:05, EN ISO 14121-1:07 and subsequent modifi cations.
Technical fi le at: Lavorwash S.p.A, via J.F.Kennedy,12 Italy, 46020 Pegognaga (MN)
Pegognaga, 17/06/2009
3
5
EN
/ P86.0206
99,3 dBA
Giancarlo Lanfredi - General manager
2
4
8
7
6
EN
1
9
10
11
25