Air Conditioner Use; Air Conditioner Care - Haier QPCD05NXTW Manual Del Propietário

AIR CONDITIONER USE

IMPORTANT: If the air conditioner has been tilted on its side,
wait 24 hours before turning on the air conditioner to allow
the oil to return to the compressor. This will prevent the air
conditioner from failing prematurely.
• Allow 20" (51 cm) of space around the unit for proper air
circulation.
• Do Not operate the air conditioner without air filters in
place.
• Do not spill liquid on the control panel; it may cause an
electrical short to the interior electronic parts that would
either disable them or cause them to function improperly.
• When turning on the air conditioner for the first time
after plugging it into an electrical outlet, the unit will
start in Cooling mode set at 75ºF (24°C), and at High fan
speed. The control panel will display the current room
temperature.

AIR CONDITIONER CARE

WARNING
Electrical Shock Hazard:
• Disconnect power before cleaning.
• Failure to do so can result in death or electrical shock.
Cleaning
1. Unplug or disconnect power.
2. Use only a soft cloth dampened with water to clean the
cabinet.
NOTE: Do not use a liquid or spray cleaner to clean the air
conditioner.
NOTE: DO NOT use chemicals, abrasives, ammonia,
chlorine bleach, concentrated detergents, solvents or
scouring pads. Some of these chemicals/items may
damage and/or discolor your air conditioner.
3. Dry thoroughly with a soft cloth.
4. Plug in or reconnect power.
Air Filters
The air filters should be cleaned at least once a week for your
unit to operate at optimum efficiency.
IMPORTANT: Do Not operate the air conditioner without the
air filters in place.
1. Unplug or disconnect the power.
2. Pull on the tabs to slide out the filters from the back of the
air conditioner.
NOTE: The secondary filters are accessible once the main
filters are removed.
3. Wash or vacuum the dust from the air filters.
NOTE: If washed, gently shake the filter to remove the
excess water and dust particles trapped in the filter.
49-7782-1
• When turning on the unit after previous use, it will
remember the last settings used.
• After a normal shut down, please wait for 3 minutes before
restarting the unit.
• In Cooling mode, this unit should not require water to be
removed. This model has a unique design that continuously
evaporates the water.
• When the unit is operated in high humidity conditions, you
may need to empty the water tank periodically.
• The unit will shut down automatically when the water tank
is full. The Full indicator illuminates to alert you of this
condition.
4. Reinstall the filters.
5. Plug in or reconnect power.
Internal Water Tank
The Full indicator illuminates, when the internal water tank
has filled with condensed water.
To Empty the Internal Water Tank:
1. Unplug or disconnect power.
2. Place a shallow 1 quart or larger pan (not included) below
the lower drain located on the back (near the bottom) of
the air conditioner.
3. Remove the cap and the rubber plug and drain the water
tank.
4. Re-insert the drain plug and screw the cap snugly into
place.
5. Plug in or reconnect power.
Storage
If the unit is not being used for a long period of time:
1. Unplug or disconnect power.
2. Drain the water from the water tank. See "Air
Conditioner Care."
3. Use the original packaging to repack the unit to avoid a
buildup of dust or dirt.
4. Store the air conditioner in a cool, dry location.
13