Removal Of The Filter Cartridge; Electrical Hook-Up Of The Hood - De Dietrich DHD1131X Manual De Utilización

- REMOVAL OF THE FILTER CARTRIDGE

To remove the grease filter, open the panel as shown in the section "opening the panels".
When the panel is open, pull the relevant handle to remove the grease filter.
To refit the grease filter after cleaning, follow the above steps in reverse order.
Warning: when hooking the stainless steel panel covering the filter back into place, make sure
it is securely in position.
- ELECTRICAL HOOK UP OF THE HOOD
This appliance is fitted with an H05 VVF 3 conductor, 0.75 mm2 (neutral, phase, and
ground) power cable. This can be hooked up to a 220 – 240 V mono-phase electrical net-
work by way of a CEI 60083 regulation power socket that must remain accessible after
installation, in conformity to installation regulations.
We decline all responsibility in case of accident caused by a lack of ground connection
or incorrect ground connection. The fuse used must be 10 or 16 A. If the power cable is
damaged, call the after-sales service to avoid any risk.
Attention:
If the hood presents some form of anomaly, unplug the appliance or remove the fuse corre-
sponding to the appliance's power line.
21