Replacing The Charcoal Filter - Maytag M1200 Manual Del Propietário

MAIntenAnCe AnD CARe

Replacing the Charcoal Filter

• Remove the bag compartment cover and
locate the filter on the left side of the
bag compartment.
• Pull the front tab away from the vacuum
to remove the filter holder (Fig. 1).
• Remove and discard the used Charcoal Filter.
NOTE: Filters cannot be washed
and reused.
• Insert a new Charcoal Filter under the tabs
in the holder. Then align the back of the
filter holder into the vacuum first and snap
it into place behind the tab.
• Replace the bag compartment cover
and press down on the latch to secure
it into place.
16
Fig. 1