Thermal Motor Protection - Maytag M1200 Manual Del Propietário

Thermal Motor Protection

CAUTION! To Reduce the Risk of Injury From
Moving Parts, Unplug Before Servicing.
Your vacuum is equipped with a safeguard
to recognize when the vacuum might
overheat and shuts itself off. When this
happens the headlights are still on but the
motors shut off. Common reasons why a
vacuum may overheat include operating
with a full bag or when there is a clog in
the vacuum.
If the Thermal Motor Protection System
shuts off your vacuum, follow these steps:
• Unplug the vacuum.
• Inspect the vacuum for a full bag
condition or a hose clog and correct
the problem.
• Locate the Thermal Motor Protection Reset
Button on the back of the vacuum. Press
the button and resume vacuuming.
If problem continues, contact your
Authorized Maytag Service Center.
MAIntenAnCe AnD CARe
Thermal Reset
1. Unplug machine
2. Locate problem
source (clogged
hose or full bag)
19
3. Correct problem
4. Press reset button
If problem persists,
consult owner's manual
or contact retailer.
Thermal Reset
1. Unplug machine 3. Correct problem
2. Locate problem 4. Press reset button
source (clogged
If problem persists,
hose or full bag) consult owner's manual
or contact retailer.