Operation; Reclining The Handle; Vacuuming Carpet; Vacuuming Hard Surfaces - Maytag M1200 Manual Del Propietário

Reclining the Handle

Press the Handle Release Pedal with your
foot to recline the handle.

Vacuuming Carpet

For carpet cleaning, push the On / Off Switch
to the "On" position. The Carpet Button will
illuminate indicating the carpet cleaning setting
is on (Fig. 1). The carpet cleaning setting will
remain on until the Carpet Button is pushed
and the button is no longer illuminated.

Vacuuming Hard Surfaces

For bare floor cleaning (i.e. tile, wood, or
vinyl), push the On / Off Switch to the
"On" position. Push the Carpet Button.
The Carpet Button will no longer be
illuminated indicating the carpet setting
is off and the bare floor setting is on (Fig. 2).

Brushroll Auto Shut-Off Feature

When the vacuum is turned on and in the
upright position, the brushroll will not spin
to reduce the possibility of damaging floor
surfaces. The brushroll will spin when the
handle is lowered, if the Carpet Button
is illuminated.
Always turn the vacuum cleaner off before
unplugging it from the electrical outlet.
This vacuum is intended for household use only.
Press
Carpet Cleaning
Press
Press
Bare Floor Cleaning (Wood, Tile, etc.)
7

oPeRAtIon

ON
OFF
Fig. 1
ON
OFF
Fig. 2