Operation And Maintenance - Cisco Webex Manual Del Usuario

Ocultar thumbs Ver también para Webex:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 4

OPERATION AND MAINTENANCE

Wood
Wood is a natural product, and each
veneer is unique. Color, pattern, and
structural differences are considered
as normal and a part of the décor.
Wood changes over time when
exposed to UV-light.
Storage, installation and use
conditions
Only for indoor use and not in wet
rooms. Storage, Installation and Use
at 18-50 °C and 25-60% humidity.
The humidity in the underlaying
construction (concrete) should not be
higher than 15%.
Cleaning
Cleaning is done by dry mop or
vacuum. Use synthetic cleaning fluid
without ammonia for greasy stains,
fruit, wine, and coffee. Blood is
removed with cold water.
Our UV coated and Laminate surfaces
are approved for hospital cleaning
products containing up to 70%
alcohol.
How to handle Gustafs products
during transport, installation, and
use
1. Gustafs solutions are sensitive to
humidity and water, therefore they
should always be stored dry and
indoor.
2. Keep the packaging closed during
storage.
3. Keep the panels in their packaging
for at least 24 hours in correct
room climate before installation.
4. Avoid exposure to strong and
direct sunlight.
5. Do not expose visible surfaces to
sharp objects during installation.
6. Do not transport unsecured
panels.
7. Lift panels flat, vertically and one
at the time.
8. Do not slide products on each
other.
9. Lean panels against a wall for
short term storage.
10. On the building site, protect both
non-installed and installed panels
and ribs from impact coming
from ladders, trolleys, furniture
installation, etc., including all other
workers and their tools.
Caution!
Sensitive to humidity and water.
Sensitive to humidity
Sensitive high-finish surface.
Sensitive to direct sunlight.
and water.
Do not transport unsecured panels.
Lift panels vertically.
Do not slide on
Lean panels against wall
panel beneath.
for short term storage.
Keep panels in packaging for
24 hrs in room climate.
Keep panels in packaging for
24 hrs in room climate.
Lift only one panel at
a time.
Do not store loose
Do not lean objects against an
panels in a pile.
installed panel wall.

Publicidad

Tabla de contenido
loading

Tabla de contenido