Set Password - AKASO B70 Manual Del Usuario

③ Then set password, click "Done".

Set Password

④ After registering the account, you need to add home information, click "Add Home",
fill in home name, location, add rooms, then click "Done" to add successfully.
Note:
• Username must be a valid email address.
• Password must be between 6-20 digits in length.
• Please choose the same country in register and login.
• If you have forgotten your password, click "Forgot password" to retrieve your
password via email verification.
4. Add Your Camera
Follow the on-screen instructions to finish the setup to connect your router.
30cm ~ 100cm
06
Done
Way 1: Add device by QR Code - Use camera to scan the QR code on the mobile phone
which contains net-pairing information.
Note: When the device is powered on, the indicator light will be on. After the beep is
heard, the device indicator light flashes red quickly.
① Bring the camera and your phone to the router within 1 to 3 feet (30 to 100 cm) and
connect Wi-Fi.
② Follow the instructions to ensure that the camera is activated. (The indicator light is
turning red and flashing slowly.)
③ Select 2.4GHz Wi-Fi and input password, tap "NEXT".
④ Click "Add Device → Security&Sensor → Smart Camera → next step → Enter Wi-Fi
Password → Confirm → Continue".
Family akaso
Welcome home
Set your home location, get more
Add Device
information
Power the device on and make sure
All Devices baby room Living Room ...
the indicator is flashing quickly or a
prompt tone is heard
No device
Add Device
Home Smart Me
Add Device Otherwise Add Device
Enter Wi-Fi Password
Only 2.4 Ghz Wi-Fi networks are supported
AKASO
Change Network
Password
help
next step
Confirm
07