Add Device - AKASO B70 Manual Del Usuario

⑤ Align the QR code with the camera lens in the distance of 6 inches (15cm) until the QR
code is recognized. After hearing the sound "Bee", tap "HEARED THE BEEP", see below
picture.
⑥ After clicking "HEARD THE BEEP", the camera will start connecting Wi-Fi, when
connection finishes, you can edit the camera name and select the room, then click
"DONE" to switch to All Devices list, now you can watch live video.
Cancel
Connecting Now
2%
Make sure your phone and device
are as close to your router as possible.
Searching for Device
Registering device to the cloud
Initializing your Device
08

Add Device

Device added
successfully
Akaso camera
baby room
Living Roo... Dining Ro...
Bedroom
Completed
Way 2: Add device by Smart Config - Mobile phone will broadcast the net - pairing
information, device will connect the router when it receives the information.
Note: When the device is powered on, the indicator light will be on. After the beep is
heard, the device indicator light flashes red quickly.
① Click "Add Device → Security Camera → Otherwise → SmartConfig".
Gunnar
84.3°F High H...
Outdoor Temp Outdoor AQL Outdoor Humid...
All Devices Living Room Bedroom Setting
Nodevices yet
Add Device
My Home Smart Scenes Profile
Otherwise
Add Device
Add Device
Power the device on and make sure the
indicator is flashing quickly or a prompt
tone is heard
Help
next step
Add Manually Search for Device
Electrical
Engineering
Lighting
Large Home
Appliance
Small Home
Appliance
Kitchen
Appliance
Security
& Sensor
Exercise
& Health
Others
Select net-pairing method
AP Mode
Mobile phone transmit the net-
pairing info by connecting camera'a
hotspot.
Smart Configuration
Mobile phone will broadcast the net-
pairing information, device will
connect the router when it receives
the info.
Wired Network Configuration
Use a network cable to connect the
device to a router. Register and add
the device to the cloud.
09