Insert Microsd Card; Format Microsd Card - AKASO B70 Manual Del Usuario

② After confirming that the device indicator is flashing red quickly, click "Next → Enter
Wi-Fi Password → Confirm". The device indicator starts flashing blue quickly, then the
blue light is always on. The mobile app starts counting seconds and is searching for
devices waiting for a connection. After the APP prompts that the device has been
searched, click "Done". Click Camera icon to preview camera.
Add Device Otherwise
Power the device on and make
sure the indicator is flashing
quickly or a prompt tone is heard
How to set the indicator to flash
quickly or with a prompt tone
next step
10
Cancel
Enter Wi-Fi Password
Wi-Fi: AKASO_WiFi Change Network
Confirm
This app is supported only on 2.4GHz Wi-Fi
channels.

INSERT MICROSD CARD

Insert MicroSD Card

FORMAT MICROSD CARD

Micro SD Card and Cloud Storage can be selected, support 2-128GB card with Class 10 or
above. In order to make sure the card more compatible with the camera, please format it
firstly on computer as FAT32, then format it again in camera after inserting the card. After
finishing, the camera will start to record.
Please format as per the below:
① Open "Akaso Smart" to enter into the main interface, click smart camera icon to enter
into the live view interface.
② Click on the right top to enter into the more setting, click "Memory Card Settings
→ Format SD Card → CONFIRM" to format the card, please see below:
11