CHAPTER -9: TROUBLESHOOTING
FAULT
Unsatisfactory
washing result.
As soon as the ma-
chine is loaded with
water, water dis-
charges.
No water appears
in the drum during
washing.
Laundries have
detergent residues
on them.
Grey spots appear
on the laundries.
(**) See the chapter regarding installation of your machine.
All manuals and user guides at all-guides.com
POSSIBLE
CAUSE
Water being hard.
( Contaminated, lime
water etc.)
Laundries distributed
in your machine non-
homogenously.
The end of water
discharging hose
is too low for the
machine.
No fault. Water is
in the unseen part
of the drum.
Non-dissolving
particles of some
detergents may
stick to your
laundries as white
spots.
The reason for such
spots may be oil,
cream or ointment.
EN -72-
TROUBLE-
SHOOTING
Adjust the amount of
detergent based on the
instruction of detergent
manufacturer.
Spread your laun-
dries in the ma-
chine properly and
homogeneously.
Set the water dis-
charging hose on ap-
propriate height. (**)
Perform an Extra
rinse by setting your
machine to "Rinsing"
programme, or clean
the spots using a
brush after your laun-
dries dry.
Apply the maximum
amount of detergent
instructed by the deter-
gent manufacturer in the
next washing operation.