CARE Runner-20 Manual De Instrucciones página 11

The most happened symptom is current overload protection. And show E1(error 1) on monitor.
E1 is to inform the runner to examine your treadmill by yourself to avoid the damage happened
on treadmill. The runner can follow the below steps to do the examination.
1). E1 would be happened by electricity system at your home. Sudden big current would cause
E1. Please turn off the on-off switch, then turn on the switch to resume the using.
If it still happened, the most reason is too much friction between the running belt and the running deck.
2). Please do lubrication according to LUBRICATION MAINTENANCE instruction. Enough lubrication will improve the
performance and maximum the treadmill life.
3). Keep clean under running belt.
4). Check the tension between roller and running belt. (please see BELT ADJUSTMENT)
5). The damaged running belt will increase the current and be easy to cause E1. Wear proper footwear
while using. It can avoid to damage the running belt.
If still can not solve it, please call your dealer for helps.
To order spare parts
To guarantee an efficient service, make sure you have the following items before you
contact our After Sales Service:
The name or reference of the product.
The manufacturing number shown on the main chassis and on the packing box.
The number of the missing or faulty part shown on the exploded view of the
Product described in this manual.
Contact us from Monday to Friday between 9h00 and 12h00 and 13h00 and
17h00 (except for public holidays).
18 / 22 rue Bernard – Z.I. les Vignes
93012 BOBIGNY Cedex
Tel.: 0820 821 167 Fax: 00 33 1 48 43 51 03
Email: sav@carefitness.com
CARE