Care & Maintenance - CARE Runner-20 Manual De Instrucciones

NOTE: Use the silicone that is supplied with the treadmill. Additional silicone lubricant can be purchased from
your retail store.
WARNING: STOP the treadmill and remove the safety key before lubricating the running deck.
CARE & MAINTENANCE
WARNING!:To prevent electrical shock, be certain the treadmill is turned off and unplugged before cleaning or routine
maintenance.
RUNNING BELT AND RUNNING DECK LUBRICATION
For maximum treadmill life, this treadmill needs a routine lubrication as part of a general maintenance for the machine. The
routine maintenance procedure will prevent premature wear of the running belt, running deck
and drive motor system. The recommended lubrication schedule as:
This schedule is the recommended application for a single user, up to 20~30 minutes per time. 3~4 times per week. For
lubrication, you can contact your dealer.
CLEANING
Perspiration should be wiped from the console and treadmill surface after your workout. You should wipe down
your treadmill once a week with a water dampened, soft cloth. Be careful not get excessive moisture on the display panel
as this might cause an electrical hazard or electronics to fail.
STORAGE
Store your treadmill in a clean and dry environment. Ensure the master power switch is off and is un-un-plugged from the
electrical wall outlet.
MOVING
This treadmill has been designed and equipped with wheels for easy mobility. Before moving, ensure the master power switch is
in the off position and the power cord is unplugged from the electrical outlet.
FOR CONSUMER/HOME USE ONLY!!
This treadmill is designed for home use only. Do not use for light institutional or commercial.
LUBRICATION MAINTENANCE
It is important to take good care of your treadmill deck (the walking surface underneath the belt). A good silicone lubrication will
also improve the performance of your treadmill.
NOTE: Use the silicone that is supplied with the treadmill. Additional silicone lubricant can be purchased from
your retail store.
WARNING: STOP the treadmill and remove the safety key before lubricating the running deck.
HOW TO SPRAY SILICONE ON DECK?
USAGE LUBRICATION
1~6kph Every 6 months
6~12kph Every 3 months
12~18kph Every 2 months