Device Elements; Settings; Main Switch - Kärcher SB MU Manual Del Usuario

Arrangement of the modules in the ma-
chine room (example)
1 Rim cleaner
2 Booster pump fresh water
3 Control board
4 Hose heating
5 Foam station
Polish station
6 Pump module
7 Buffer tank for permeate
8 Hot water generation, provided by the
customer
9 Hot water tank, provided by the custom-
er
10 Water treatment (WSO)
11 Salt tank
42

Device elements

Settings

Main switch

The main switch is located at the switch
cabinet.
1 Main switch
Position
1 Plant is working.
Frost protection (option) is
active.
0 Entire system turned off
(frost protection also).
Note:
The emergency frost protec-
tion (option) is active when
the plant is switched off.
4
-
EN
Adjust compressor
Compressor type Superfox
1 Manometer
2 Compressed air connection for service
work
3 Pressure reducer
 Set pressure reducer to 0.4...0.5 MPa
(4...5 bar).